Inquiry Basket (
Home » Product List » Switching power supply with CE » Triple Output Switching Power Supply(T-120)
Product Details
Triple Output Switching Power Supply(T-120)
| Model NO.: | T series |
|---|
Product Description
Low price and high reliability
105 degrees output capacitor
AC input power suitable for the world
Hight efficiency and low operation temperature
Soft-start current can reduce the AC input impact effecticly
With Short-circuit and owwerload protection
Compact size,light weight
100% full-load burning test
Installed with EMI filter,minimum wave
| Model Specification | T-120A | T-120B | T-120C | T-120D | ||||||||
| CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | |
| DC output voltage | 5V | 12V | -5V | 5V | 12V | -12V | 5V | 15V | -15V | 5V | 12V | 24V |
| Output voltage error(Note:2) | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±5% | ±5% | ±2% | ±6% | ±6% |
| Rated output current | 3A | 2A | 0.5A | 3A | 2A | 0.5A | 3A | 1.5A | 0.5A | 3A | 1.5A | 0.5A |
| Output current rage | 0.6-7A | 0.2-1A | 0.2-1A | 0.6-5A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1A | 0.2-1A | 0.6-4A | 0.2-1.2A | 0.2-1.2A |
| Wave and noise(Note :3) | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV | 100mV |
| Inlet stability(Note :4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±1% |
| Load stablity (Note:5) | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±4% | ±4% | ±1% | ±5% | ±5% |
| DC output power | 52W | 49W | 50W | 51W | ||||||||
| Efficiency | 66% | 69% | 71% | 72% | ||||||||
| Adjustable range for DC voltage | CH1;+10,-5% | CH1:+10,-5% | CH1:+10,-5% | CH1:+10,-5% | ||||||||
| AC input voltage range | 85-132VAC/170-264VAC 47-63Hz,240-370VDC | |||||||||||
| Input current | 1.6A/115V 0.8A/230A | |||||||||||
| AC INnrush current | Cold-start current 20A/115V 40A/230V | |||||||||||
| Leakage current | <0.5mA/240VAC | |||||||||||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||||||||||
| Over-voltage protection | ………… | |||||||||||
| High-temperature protection | ………… | |||||||||||
| Temperature coefficient | ±0.03%/ºC(0-50ºC)ON+5V | |||||||||||
| Setup rise hold up time | 200ms,50ms,16ms | |||||||||||
| Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||||||||||
| Withstand voltage | Input and output internal:1.5KVAC,Input and enclosure:1.5KVAC,Output and enclosure:0.5KVAC | |||||||||||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure:500VDC/100MΩ | |||||||||||
| Working temperature and humidity | -10ºC~+60ºC(Refer to output derating curve),20%~90%RH | |||||||||||
| Store temperature and humidity | -20ºC~+85ºC,10%~95%RH | |||||||||||
| Overall dimension | 195×97×38mm | |||||||||||
| Weight | 0.54Kgs | |||||||||||
| Safety standards | Meet UL 1012 requirement(Not apply for the mark) | |||||||||||
| EMC standards | ………… | |||||||||||
| Note: 1.The testing condition for the paramenter above is :230VAC input,rated load,25ºC70% RH.Humidity. 2.Error.include the setting error,line stability and load stability.(Note:5). 3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage. 5.Load stability test:the load is from 0% to 100%. 6.Total output canbe maximum Current,total load can not exceed the maximum output power | ||||||||||||
